InfraRed Astronomy Satellite Swarm Interferometry (IRASSI): Overview and study results

The far-infrared (FIR) regime is one of the few wavelength ranges where no astronomical data with sub-arcsecond spatial resolution exist yet. Neither of the medium-term satellite projects like SPICA, Millimetron or OST will resolve this malady. For many research areas, however, information at high spatial and spectral resolution in the FIR, taken from atomic fine-structure lines, from highly excited carbon monoxide (CO) and especially from water lines would open the door for transformative science. These demands call for interferometric concepts. We present here first results of our feasibility study IRASSI (Infrared Astronomy Satellite Swarm Interferometry) for an FIR space interferometer. Extending on the principal concept of the previous study ESPRIT, it features heterodyne interferometry within a swarm of five satellite elements. The satellites can drift in and out within a range of several hundred meters, thereby achieving spatial resolutions of <0.1 arcsec over the whole wavelength range of 1–6 THz. Precise knowledge on the baselines will be ensured by metrology methods employing laser-based optical frequency combs, for which preliminary ground-based tests have been designed by members of our study team. We first give a motivation on how the science requirements translate into operational and design parameters for IRASSI. Our consortium has put much emphasis on the navigational aspects of such a free-flying swarm of satellites operating in relatively close vicinity. We hence present work on the formation geometry, the relative dynamics of the swarm, and aspects of our investigation towards attitude estimation. Furthermore, we discuss issues regarding the real-time capability of the autonomous relative positioning system, which is an important aspect for IRASSI where, due to the large raw data rates expected, the interferometric correlation has to be done onboard, in quasi-real-time. We also address questions regarding the spacecraft architecture and how a first thermomechanical model is used to study the effect of thermal perturbations on the spacecraft. This will have implications for the necessary internal calibration of the local tie between the laser metrology and the phase centres of the science signals and will ultimately affect the accuracy of the baseline estimations.     

A review of friction stir joining of SiCp/Al composites

SiCp/Al composites have excellent comprehensive properties and have been widely used in aerospace, automotive industry and other fields. Due to the huge difference in performance between SiC particles and matrix alloys, traditional fusion welding methods are difficult to meet the join requirements of SiCp/Al composites. Friction stir joining (friction stir welding), as a solid phase joining process, has been proved to be a new technology with fine prospect in joining SiCp/Al composites compared with fusion welding process. Although some progress has been made in recent years, there are still full of challenges. In this paper, the research status of friction stir joining of SiCp/Al composites in recent years is expatiated, including the weldability of SiCp/Al composites, the macrostructure and the microstructure of joints, mechanical properties of joints, and tool wear and monitoring. Furthermore, the existing challenges of friction stir joining of SiCp/Al composites are summarized and the future development directions are prospected.     

基于激光反射层析法的换能器声场测量技术及仿真研究

换能器的辐射声场分布能够直接反映出换能器声学性能的好坏，若不能精确测量出换能器的辐射声场，则会对换能器的诊断和评估造成严重影响。从理论仿真的角度出发，推导了运用激光反射层析法重建换能器辐射声场的理论公式，着重利用推导出的理论公式对激光反射层析法进行了仿真计算。结果表明激光反射层析法能够精确地重建出换能器的辐射声场分布及声场中的声压量值，这为换能器的声场重建及声压测量提供了一种可行的方法。     

激光动态液位测量技术研究

如今,运载火箭大量使用液氧、煤油等液体推进剂,其液位测量技术主要有浮子式、激光式、电容式、雷达式等。介绍并实现了一种激光液位测量系统,该系统体积小、功耗低,可适应多种测量环境,能满足航天燃料液位测量高精度、高动态、连续稳定测量的要求。系统利用相位式激光测距技术,通过测量激光回波信号的相位延迟,计算激光光程从而得到距离数据并通过客户端进行直观展示和数据存储。系统最大测量距离可达100 m,精度为±1 mm。该系统为非接触测量,耐腐蚀,通过加入反射板可实现透明、非透明液体测量。     

直射式喷嘴喷雾特性的实验研究

用二维激光测速测粒仪,对直射式喷嘴在横向气流中所形成喷雾的粒度、平均和脉动速度,以及浓度进行了测量。研究了喷雾的结构,气流速度以及喷射方向对喷雾特性的影响,不同直径的粒子在横向的扩散。为两相流模型的研究以及数值计算结果的验证提供实验数据。      

高精度差分格式及多尺度流场特性的数值模拟

简要介绍了作者近年发展的高精度差分格式,给出了两类格式精度的分析方法,分析了粘性面差分逼近所引入的耗散量低亏效应。文中按群速度将格式分为快型,慢型和混合型三类。对每类格式分析了高频波的传播特性。     

含有V型垂尾飞机的舵面配置

现代飞机为满足先进控制技术实现和满足一定的可靠性和机动性,要求安装较多的控制舵面,为了使飞机安装舵面之间产生的操纵效能达到最佳,需要对舵面的位置、附体安装角等因素进行配置。借用飞机重构控制方法,采用Moore Penrose逆法,对飞机的操纵效能提出了一套直接控制冗余算法,使操纵舵面之间达到最佳配置。结合国内某型号飞机含有V型垂尾在配平时的数据验证算法正确性。     

直流电弧等离子体炬数值模拟与诊断

直流电弧等离子体炬内部物理过程复杂且具动态性,较难对其进行准确描述与深入研究,且其工作温度较高,其状态参数难以使用常规方式测量。针对直流电弧等离子体炬,建立流动、传热和电磁相互耦合的数值模型,基于Fluent软件对直流电弧等离子体炬进行三维数值模拟和特性分析,设计并搭建了一套热焓探针实验系统,完成对直流电弧等离子体炬射流参数的测量分析。结果表明:建立的数值模型模拟结果与实验测量结果吻合较好,误差在10%以内;炬内温度与速度最大值与工作气流量呈正相关,均出现在靠近阴极区域,且沿轴线逐渐降低;等离子体炬内高温区与高电流密度区重合。     

Study on Satellite-to-ground Laser Communications with Existence of Atmosphere

The laser beam used to establish a communication channel between satellite and ground segments has a small divergence angle and a tiny spot on the Earth’s surface, which may lead to the fail of the system. So it’s important to study the deflection of laser beam by the Earth’s atmosphere and find a way to calibrate this error. Both theoretical analysis and real data processing method are used to obtain the mathematical model for divergence angle of laser communication beam and its correction function. Then the model has been applied to the data, which was used to describe the atmosphere state by traditional ground segments to obtain the critical elevation angle. According to the results of calculation, our conclusion will be that the correction should be done when the critical elevation happens.      

稳态等离子体推进器羽流场数值模拟

采用二维轴对称模型,使用粒子网格法(PIC)和直接模拟蒙特卡洛法(DSMC)相结合的方法,对稳态等离子体推进器(SPT)羽流场进行了数值模拟.采用DSMC方法中的随机取样频率法(RSF)求解粒子碰撞过程,并对比了不同的分配电荷方式、电子运动模型及SPT出口条件时的羽流场.将不同条件计算得到的羽流场中距SPT出口0.1?m,0.5?m及1.0?m处的离子电流密度和电荷密度与实验结果进行了对比,得出在采用面积权重法分配电荷、等熵模型描述电子运动和用实验值设定发动机出口参数时对SPT羽流场数值模拟的电流密度和轴向附近的电荷密度结果与实验结果符合程度较好的结论.